Von Morris Brass Full Mortise Hinge

Solid Extrude Brass - Plain Bearing - Standard Weight

• Length of Joint : 3.0"
• Width Open : 3.0"
• Gauge of Metal : 0.093"
• Screw Size : 10 x 1.00"
• Screw Quan. Per Pair: 12

• All 11 Series Hinges are Priced and Sold as Pairs.
• All hinges have template screw hole locations for use with either wood or hollow metal doors and frames.
• All Pins are machined from high grade 304 Stainless Steel material.
• All Finials are Threated into the barrel of the hinge to prevent the pin from rising.
• All hinges are furnished standard with button finials and solid brass phillips head, type "A" tapping screws.

FEATURES OF: SOLID EXTRUDE BRASS - PLAIN BEARING - STANDARD WEIGHT HINGES

• HINGE BODY: Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances. The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed.
• FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List.
• PINS: Pins are machined from 304 Stainless Steel for high durability and resistance to rust. One end is rounded to facilitate re-assembly, while the other end is knurled to keep the pin from dropping through the hinge barrel during re-assembly. The pin is held in place by the threaded finials and can be easily removed by unthreading the finials and tapping the pin up from the bottom.
• FINIALS: Finials are threaded into both ends of the barrel and fit all full mortise hinge sizes. Finials can be purchased separately in sets of four. Decorative finials are individually bagged and sold in sets of four.
• FASTENERS: All hinges are provided with type “A” tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either six per bag or eight per bag to facilitate sales of half pairs. #12 Machine Screws available for 11-4040 and 11-4545 upon request.
• NUMBER OF HINGES: For doors up to 89 inches, use three hinges. For each additional 30 inches or fraction thereof, use one additional hinge.

ATTENTION: Custom Finishes Take 12 WEEKS To Deliver

TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE

SEE RELATED ITEMS FOR FINIAL SELECTION