|
|
|
|
Mortise Plate Lockset Panic-Proof Lever - 55231F
| Latchbolt operates by knob or lever from either side except when outside trim is locked by stop button. Deadbolt activated by key outside and turnpiece inside. Turning of inside knob or lever will retract both deadbolt and latchbolt at the same time. | |
Door Style : Single Trim Plate Type : Single Cylinder Installation Type : Mortise Style : Ornate Type of Material : Brass Mortise Plate Lockset Panic-Proof Lever - 55231F Product Features
- Available with two backsets options: 2 1/2” or 2 3/4”. (Please specify backset on order.)
- For Doors: 1-3/4" as Standard. For doors over 1 3/4” thick, please call for ordering Instructions.
- Latchbolt: Solid Brass with two-piece anti-friction design. Both lock bodies with 1” x 5/8” x 3/4” full throw.
- Deadbolt: Solid brass, one-piece component with sawproof insert. 2 1/2” b.s: 1 13/16” x 9/16” x 1” Full Throw. 2 3/4” b.s: 1 1/8” x 1/2” x 1” full throw.
- Springs: High carbon steel.
- Strike: Solid brass curved lip Strike. 4 7/8” x 1 1/4" x lip 1 1/4” to center. Finish to match trim Dust box supplied as standard.
- Hand: When ordering specify right or left hand.
- Cylinder: Solid brass for bar stock. Made in USA. Schlage “C” keyway supplied as a standard, with two Omnia brass keys.
- Keyways: Keyed alike option must be selected per lock when needed.
|
Mortise Plate Lockset Panic-Proof Lever - 55231F Product Includes
- AVAILABLE FINISHES: Polished Brass(Lacquered) and Shaded Bronze(Lacquered)
- 2 Lever Handles
- 2 Backplates
- 2-1/2" or 2-3/4" Backset Mortise Lock
- Cylinder, Strike, Spindle, and Dust Box
- Lock Faceplate
- All necessary mounting screws, instructions, and templates.
- Lever sets are supplied with extra heavy duty mortise lock especially designed for lever handles.
|
Mortise Plate Lockset Panic-Proof Lever - 55231F Product Specifications
| Projection |
2-5/16 x 1/8 in. |
| Overall |
17-3/4 in. |
 Mortise Plate Lockset Panic-Proof Lever - 55231F Important Notes
- Safety Standards: 2 1/2” b.s.:UL listed for class “A” or lesser doors. Conforms to requirements of ANSI/BHMA A156.13 Series 1000 2 3/4” b.s.: UL listed for class “A” or lesser doors. Conforms to requirements of ANSI/BHMA A156.2 Series 1000
- Specify Backset and Handing when ordering.(SEE OPTIONS BELOW)
- All lever entry sets provide a lever outside and a lever inside with matching rose or backplate. If the outside trim is a lever with plate, the inside trim will match. If the outside trim is a lever with rose, the inside trim will be a lever with rose. The same is true for sets employing knobs. For additional trim options, see our Latchsets section.
- PLEASE REFER TO THE FAQS LINK BELOW IMAGE TO DETERMINE HANDING.
|
Note: It is the sole responsibility of the customer to download and mail in the rebate form by the respective closing date. KnobsAndThings.com (Home Decor Products, Inc.) cannot be held responsible for non-compliance of the afore-mentioned. Please click here for detailed policies.
|
|
|
|
|
|
