Valli & Valli Bernina Series Privacy Door Lever with Small Stainless Steel Rosette - H5014-RSS-PCY

Most commonly used for bedroom and bathroom doors.
• Latch operated by lever/knob either side.
• Privacy pin on the inside with emergency release hole on the outside (RT, RP, RO, RZ, RQ, RQS, RPS).
• Door preparation: 2-1/8" cross bore (RT, RP, RO, RZ, RQ, RQS, RPS) with a 1" edge bore.
• Concealed mounting screws
• Available backsets: 2-3/8" (Standard) and 2-3/4".
• Non-handed latch retracting at a 52-degree rotation.
• Spring loaded rosettes to insure retraction, strength, and durability.
• See the Color and Finishes tab for available finishes.
• To ensure correct installation, please refer to our handing and backset guide in the FAQ.

INCLUDED
• Standard T-strike.
• Standard screws, spindles, etc, provided to fit doors 1-3/8" - 2" thick.

Valli and Valli warrants that all products shall be free from defects in material or workmanship for a period of one year following their purchase. All products with the Zirtanio Finish are protected against defects in material and workmanship for as long as the original consumer purchaser owns the product.

Valli and Valli’s sole obligation under this warranty shall be to repair or replace products which Valli and Valli determines to be defective. This warranty does not include removal of the defective product or installation of the replacement product, which are the responsibilities of the original purchaser. This warranty does not cover product failure caused by improper installation, product abuse, casualty, or other abnormal condition.