|
|
|
|
Mortise Plate Lockset Standard Lever - 11904A
| Latchbolt operates by knob or lever from either side except when outside trim is locked by stopbutton; then opens by key outside, by knob or lever inside. Deadbolt activated by key outside and by turnpiece inside. | |
Door Style : Single Trim Plate Type : Single Cylinder Installation Type : Mortise Style : Traditional Type of Material : Brass Mortise Plate Lockset Standard Lever - 11904A Product Features
- Available with two backsets options: 2 1/2” or 2 3/4”. (Please specify backset on order.)
- For Doors: 1-3/4" as Standard. For doors over 1 3/4” thick, please call for ordering Instructions.
- Latchbolt: Solid Brass with two-piece anti-friction design. Both lock bodies with 1” x 5/8” x 3/4” full throw.
- Deadbolt: Solid brass, one-piece component with sawproof insert. 2 1/2” b.s: 1 13/16” x 9/16” x 1” Full Throw. 2 3/4” b.s: 1 1/8” x 1/2” x 1” full throw.
- Springs: High carbon steel.
- Strike: Solid brass curved lip Strike. 4 7/8” x 1 1/4" x lip 1 1/4” to center. Finish to match trim Dust box supplied as standard.
- Hand: When ordering specify right or left hand.
- Cylinder: Solid brass for bar stock. Made in USA. Schlage “C” keyway supplied as a standard, with two Omnia brass keys.
- Keyways: Keyed alike option must be selected per lock when needed.
|
Mortise Plate Lockset Standard Lever - 11904A Product Includes
- AVAILABLE FINISHES: Polished Brass(Lacquered), Polish Chrome Plated, and Satin Nickel Plated(Lacquered)
- 2 Lever Handles
- 2 Backplates
- 2-1/2" or 2-3/4" Backset Mortise Lock
- Cylinder, Strike, Spindle, and Dust Box
- Lock Faceplate
- All necessary mounting screws, instructions, and templates.
- Lever sets are supplied with extra heavy duty mortise lock especially designed for lever handles.
|
Mortise Plate Lockset Standard Lever - 11904A Product Specifications
| Projection |
2-3/8 x 5/16 in. |
| Overall |
10-5/8 in. |
 Mortise Plate Lockset Standard Lever - 11904A Important Notes
- Safety Standards: 2 1/2” b.s.:UL listed for class “A” or lesser doors. Conforms to requirements of ANSI/BHMA A156.13 Series 1000 2 3/4” b.s.: UL listed for class “A” or lesser doors. Conforms to requirements of ANSI/BHMA A156.2 Series 1000
- Specify Backset and Handing when ordering.(SEE OPTIONS BELOW)
- All lever entry sets provide a lever outside and a lever inside with matching rose or backplate. If the outside trim is a lever with plate, the inside trim will match. If the outside trim is a lever with rose, the inside trim will be a lever with rose. The same is true for sets employing knobs. For additional trim options, see our Latchsets section.
- PLEASE REFER TO THE FAQS LINK BELOW IMAGE TO DETERMINE HANDING.
|
Note: It is the sole responsibility of the customer to download and mail in the rebate form by the respective closing date. KnobsAndThings.com (Home Decor Products, Inc.) cannot be held responsible for non-compliance of the afore-mentioned. Please click here for detailed policies.
|
|
|
|
|
|
